|
|
|
|
|
|
|
Complete standalone ECU for the 84-87 turbo Buicks, and 89 Pontiac Turbo TA. See www.ecugn.com for details.
|
For use with the ecuGN. Individual Coil Near Plug Harness for LS Coils.
|
|
|
|
|
|
|
|
|
For use with the ecuGN. Individual Coil Near Plug Harness for IGN1A, Holley, Pantera Coils
|
BACKORDERED For use with the ecuGN. Allows the use of the newer style coilpack, and the removal of the stock ignition module.
|
|
|
|
|
|
|
|
|
Replacement Bosch wideband oxygen sensor for the ecuGN aftermarket ECU only, not the stock Buick computer.
|
Allows the plug-n-play connection of a flexfuel sensor to the original MAF connector, which sends the signal to the ecuGN. Long version to mount sensor at back of car, 15 feet.
|
|
|
|
|
|
|
|
|
Allows the plug-n-play connection of a flexfuel sensor to the original MAF connector, which sends the signal to the ecuGN. Short version to mount sensor under hood, 4 feet.
|
Replacement wideband cable for the ecuGN Same length as original, which is about 8-1/2 feet.
|
|
|
|
|
|
|
|
|
2.2 chip for Buick Scanmaster (Powerlogger and ecuGN only)
|
This connector is for the 22-pin expansion port on the side of the ecuGN. It includes the crimp terminals.
|
|
|
|
|
|
|
Qty 2 replacement fuses for the ecuGN (fuses F1 and F2).
|
|