Scanmaster 3 - SyTy

Your Price: $269.99

Small scantool to help tune and troubleshoot.
BLUE LED display

Part Number: 6002

Availability: Out of Stock, back soon

Quantity

The Scanmaster is a portable scantool designed to monitor data that is retrieved from the vehicle’s ECM (engine computer).

This has a BLUE display.

Features

Data Monitoring - Monitor ECM and sensor data in real time.
Code Clear - Clear malfunction codes from the ECM’s memory.
Serial Output - Log data to a laptop PC through a serial port on the back of the unit. (USB adapter may be required.)
Peak Capture - At full throttle, the peak knock retard and lean O2 values are saved, along with the respective vehicle speeds

Items Displayed on Scanmaster

Display	Description	Note	Range
O2	Oxygen Sensor	O2 in millivolts, optional wideband AFR	.000-.999
KR	Knock Retard	Timing retard in degrees due to knock	0.0-25.6
MAP	Manifold pressure	Manifold absolute pressure in kPa	0-315
bSt	Boost	Actual Boost in PSI	0.0-30.0
AFr	Air/Fuel Ratio	ECM Commanded AFR or Wideband AFR	0.0-20.0
bat	Battery Volts	Voltage from ignition	0.0-25.6
Int	Integrator	Short term fuel trim	90-150
bL	Block Learn (BLM)	Long term fuel trim	90-150
MPH	Miles per hour	Vehicle speed	0-255
CLt	Coolant Temp	Current coolant temperature	-40° to 300°
AtS	Air Temp Sensor	Current manifold air temperature	-40° to 300°
r	Engine RPM	RPM	0-6400
tPS	Throttle Position Sensor	Voltage reading from TPS	0.0-5.0
IAC	Idle Air Control	Commanded position of IAC motor	0-255
CC	Cross Counts	Activity of oxygen sensor	0-255
MAL	Malfunction Code	Stored malfunction codes
inJ	Injector Pulsewidth	Injector pulsewidth in milliseconds
SP	Spark Advance	Spark advance in degrees
bdc	Boost duty cycle	Wastegate solenoid duty cycle in percent	0.0-99.9%
	Open or Closed Loop Status	Decimal point in knock retard reading will blink for open loop, or remain solid for closed loop.