(Your shopping cart is empty)
Allow 7-10 days to make the chip!
The SD2 Chip. This chip is for more advanced tuners. You must have a Powerlogger installed and a 3-bar MAP connected to the Powerlogger. See below for more info.
Availability when in stock::
Usually ships in 7-10 days
86/87 Turbo Buick
84/85 Turbo Buick with 86/87 ECM
89 Turbo Trans Am
Set defaults for E85
Set defaults for Gasoline
Injector Type (part# helpful)
- Please try to give part#. No ebay, replica, or smartfire injectors! Only genuine Siemens, Bosch, SMP, Lucas, etc.
ECM reading correct MPH?:
Yes, it's within +/- 10 MPH
No, the reading is incorrect (tell me how much)
No, it reads zero MPH
I don't know, lets assume its right
Keep this short, enter extra info during checkout.
This is the latest v1.2 with flexfuel capability.
The SD2 chip is for more advanced tuners. YOU will be tuning it, and it will need to be tuned. It comes with a basic startup tune to get you going. You must have a Powerlogger installed and a MAP sensor connected to the Powerlogger (normally a 3-Bar MAP, but others can be used). It allows the MAF to be removed and allows closed loop wideband operation at all times (if a wideband is connected to the Powerlogger). This chip uses speed density calculations to calculate airflow and fuel. It has many adjustments that allow you to fine tune. Works with the Powerlogger to allow access to VE and spark tables, and live tuning!
I recommend reading through the instructions, and making sure you understand them, before purchasing this chip.
Here's a link to the current instructions:
Browse for more products in the same category as this item:
3567 Purcell Dr.
Salem, IL 62881
Send Us Feedback
Copyright © 2004 TurboTweak. All Rights Reserved.