 |
 |
 |
|
| AEM 3.5 Bar MAP Sensor. You can use this with the Powerlogger to log boost up to 35psi. More accurate at high boost than the GM 3 bar MAP. Comes with fittings and electrical connector. You may have devices on your car that require a 3 bar (like an alky kit, or the TT SD chip), so you might need to leave the 3 bar on the car. This 3.5 bar can be added separately by tapping into the 5v power and ground from your existing MAP sensor, then run the signal wire to the Powerlogger. If you have one of my SD chips and you want to run the 3.5 MAP, get a hold of me as I'll need to change the chip. |
|
|
|
|
|
|
